UK Day Rate to Salary: What Day Rate Equals Your Salary?

Convert between a contractor day rate and a permanent salary using 2026/27 employer costs

Published Oct 27, 2026•By Mubarak, Software Developer & Marketing Specialist

UK contractors are quoted day rates and permanent staff are quoted salaries, which makes the two hard to compare. Multiplying a day rate by 220 is the usual shortcut, and it flatters the day rate. This guide converts both ways using employer National Insurance, pension, statutory holiday and realistic billed days.

Open the Salary to Contract Rate tool

Disclaimer

The information on this page is for educational purposes only and does not constitute professional financial, tax, or legal advice. Please consult a qualified professional before making financial or business decisions.

The short answer

A £60,000 UK salary is matched by a contractor day rate of about £400 if you bill 80% of your working days, or about £320 if you are booked every working day, once employer National Insurance (15% above £5,000), a 3% employer pension and 28 days of paid leave are included. Going the other way, a £500 day rate is worth roughly £76,000 to £96,000 as a salary, not the £110,000 that multiplying by 220 days suggests.

How do you convert a salary to a day rate?

Work out what the job costs the employer in total, then divide by the number of days you will actually be paid for as a contractor.

Employment cost = salary + employer NI + employer pension + other benefits + equipment and training
Billed days = (260 − annual leave − bank holidays − paid sick days) × utilisation
Day rate = (employment cost + your business costs) ÷ billed days

There are about 260 weekdays a year. An employee is paid for all of them; a contractor is paid only for the days they bill. Utilisation covers the days lost between contracts, to admin and to finding the next role.

What does an employee cost on top of salary in the UK?

For 2026/27 the statutory minimum is roughly 15% employer NI on most of the salary plus a small pension contribution, before any extra benefits.

Employer National Insurance

Employers pay 15% Class 1 National Insurance on earnings above the secondary threshold of £5,000 a year, according to GOV.UK rates and thresholds for 2026 to 2027 (as of October 2026). On a £60,000 salary that is £8,250. The Employment Allowance reduces an eligible employer's total bill, but it is a per-business relief rather than a cost of any one employee, so it is left out here.

Employer pension

Under automatic enrolment the employer must pay at least 3% of qualifying earnings, which for 2026/27 are earnings between £6,240 and £50,270, according to The Pensions Regulator. The maximum minimum contribution is therefore 3% × £44,030 = £1,320.90. Many employers pay 5% or more of full salary, which is worth checking in your own contract.

Holiday

Most workers on a five-day week are entitled to at least 28 days of paid leave a year (5.6 weeks), and the employer can count bank holidays as part of it, according to GOV.UK holiday entitlement. England and Wales have 8 bank holidays, so the minimum is often 20 days plus bank holidays. Many employers offer 25 days plus bank holidays.

What day rate equals my salary?

Roughly 0.65% to 0.7% of the salary per day at 80% utilisation, or about 0.55% if you are booked solid all year.

Break-even day rate for a UK salary (statutory minimums, £2,000 equipment and training, £3,000 contractor costs, as of October 2026)
SalaryEmployer NIDay rate, 80% billed (185.6 days)Day rate, fully booked (232 days)
£40,000£5,250£276£221
£50,000£6,750£340£272
£60,000£8,250£402£321
£70,000£9,750£464£371
£80,000£11,250£526£421
£100,000£14,250£650£520

Leave is set to 20 days plus 8 bank holidays, with no paid sick days because statutory sick pay is far below full pay. Adjust any of these in the salary to contract rate calculator by choosing the United Kingdom preset.

What salary is my day rate worth?

Run the same calculation backwards: find the salary whose full employment cost your day rate replaces.

Salary equivalent of a UK day rate (same assumptions)
Day rate80% billedFully bookedDay rate × 220
£300£43,700£55,700£66,000
£400£59,700£75,900£88,000
£500£75,900£96,000£110,000
£600£92,000£116,200£132,000
£700£108,100£136,400£154,000
£800£124,300£156,500£176,000

The ×220 column treats every pound of the day rate as salary. In reality an employer paying a £96,000 salary also pays about £13,650 of NI and a pension contribution, and gives you 28 paid days off. Those are costs your day rate now has to cover.

Worked example: a £60,000 job with 25 days' holiday and a 5% pension

A better-than-statutory package pushes the break-even day rate to about £415.

  1. Salary: £60,000.
  2. Employer NI: 15% × (£60,000 − £5,000) = £8,250.
  3. Employer pension: 5% of qualifying earnings £44,030 = £2,201.50 (some employers apply it to full salary, which would be £3,000).
  4. Equipment and training: £2,000. Employment cost: £72,451.50.
  5. Your own costs (insurance, accountant, software): £3,000. Total: £75,451.50.
  6. Days: 260 − 25 holiday − 8 bank holidays = 227 available; at 80% that is 181.6 billed days.
  7. Day rate: £75,451.50 ÷ 181.6 = £415.48, or about £55.40 an hour on a 7.5-hour day.

The salary works out at £230.77 per paid weekday (£60,000 ÷ 260), so the contract rate is 1.8 times the salary's daily equivalent.

How does IR35 affect the comparison?

IR35 changes how much of the day rate reaches you, so inside-IR35 roles need a higher day rate to match the same salary.

Under the off-payroll working rules, in most cases the client decides your employment status for each contract, according to GOV.UK guidance on IR35; small private-sector clients are the exception, where your own company decides. If a contract is inside IR35, the fee payer deducts income tax and employee NI and pays employer NI.

Many inside-IR35 contractors are paid through an umbrella company. GOV.UK's key information document guidance shows the umbrella receiving the assignment rate and paying employer NI, employer pension, the apprenticeship levy, holiday pay and its own margin out of it before your gross pay is set. In that case the day rate is really an employment cost, and your gross salary equivalent is lower than the outside-IR35 figures above.

  • Outside IR35: compare the day rate with the full employment cost, as in this guide.
  • Inside IR35 via umbrella: compare the gross pay on the umbrella's illustration with a salary, then remember you also lose paid holidays unless holiday pay is included.

To see take-home pay for each route, use the UK contractor take-home calculator.

Which other permanent benefits should you count?

Anything your employer pays for that you would otherwise buy yourself belongs in the employment cost.

  • Bonus. Include the bonus you reliably receive, not the maximum on paper.
  • Pension above the minimum. An employer paying 8% of full salary on £60,000 contributes £4,800, compared with £1,320.90 at the statutory minimum.
  • Private medical insurance, life cover and income protection. Check your P11D or benefits statement for the cost, or get a quote for buying the same cover privately.
  • Enhanced sick pay and family leave. If your employer pays full salary for sick days or parental leave beyond the statutory amounts, add the days you expect to use under paid sick days.
  • Equipment, training and memberships. A laptop, software licences, conference tickets and professional body fees all become your cost as a contractor.
  • Notice and redundancy pay. These have no annual cost but are real security. Contract roles can end with a week's notice, which is why utilisation below 100% is prudent.

How do you turn a day rate into an hourly rate?

Divide the day rate by the hours in the contract's working day, which in the UK is usually 7.5 or 8 hours.

Day rate7.5-hour day8-hour day
£300£40.00£37.50
£400£53.33£50.00
£500£66.67£62.50
£600£80.00£75.00

Check what the contract says about longer days. Some day-rate contracts expect whatever hours the work needs, which quietly lowers your effective hourly rate; others allow overtime or half-day billing. The day rate figures in this guide do not change with hours per day, but the hourly equivalent does.

How many days a year can a UK contractor bill?

Between about 180 and 230 for most people; the gap between those numbers is worth more than any tax planning.

232 days is the ceiling after statutory leave. Every week between contracts costs 5 days, and time spent on accounts, interviews and training is unpaid. At £500 a day, the difference between 185 and 220 billed days is £17,500 of revenue a year. Track it with the billable hours calculator.

For the general reasoning behind these multipliers, read contractor rate vs salary. For UK market rates, see freelance rates in the UK and average freelance rates; to build a rate from an income target, use the freelance rate calculator and the rate formula. If you are considering a permanent offer from a client, the contract-to-hire guide covers the conversion conversation. Terms such as utilisation are defined in the pricing glossary.

Frequently asked questions

What day rate is equivalent to a £60,000 salary?

About £400 a day at 80% utilisation, once you add 15% employer National Insurance, a 3% employer pension and 28 days of paid leave. If you are booked every working day, about £320 a day breaks even.

What salary is a £500 day rate equivalent to?

Roughly £76,000 if you bill 80% of your working days, or about £96,000 if you are booked back to back all year, on statutory leave and minimum pension. It is not £110,000, which is what multiplying by 220 days suggests.

How many days a year does a UK contractor work?

There are about 260 weekdays a year. Take off 28 days of leave and you have 232; most contractors also lose some days between contracts and to admin, so 180 to 220 billed days is a realistic planning range.

Does IR35 change the day rate to salary comparison?

It changes your take-home pay, not the gross comparison. Inside IR35 through an umbrella company, employer NI, pension and the umbrella margin come out of the assignment rate before your gross pay, so you need a higher day rate to match the same salary.

Is the divide by 220 rule accurate?

Dividing a salary by 220 gives a day rate that only covers the salary itself. It ignores employer NI, pension and other benefits, and assumes no gaps between contracts, so it usually undershoots the rate you need.