Contractor Rate vs Salary: Is the 1.5x or 2x Rule Right?
What the salary-to-contract multiplier really depends on, and how to work out yours
Ask how much a contractor should charge compared with an employee and you will hear “1.5 times” or “double”. Both can be right and both can be badly wrong. This guide shows what sits inside the multiplier, how it moves with salary and utilisation, and how to check any rule of thumb against your own numbers.
Open the Salary to Contract Rate toolThe short answer
A contractor needs roughly 1.4x to 2x the salary's hourly equivalent (salary ÷ 2,080) to break even, depending mostly on how many days they can bill. With typical US benefits, a $100,000 salary needs 1.40x if you bill every available day, 1.75x at 80% utilisation and 2.0x at 70%. The 1.5x rule only works for full-time, back-to-back contracts; the 2x rule fits freelancers who spend a third of their time finding work.
What is the salary to contract rate multiplier?
The multiplier is your contract hourly rate divided by the hourly equivalent of a salary. It is a shorthand for everything an employer pays beyond the salary, plus everything a contractor is no longer paid for.
The 2,080 comes from 52 weeks × 40 hours. Salaried employees are paid for all of those hours, including holidays and vacation. A contractor is paid only for hours billed, which is why the contract rate has to be higher than the salary's hourly figure even before benefits enter the picture. If you just want the plain conversion, the salary to hourly conversion table lists it for every salary from $20,000 to $250,000.
Where do the 1.5x and 2x rules come from?
They are informal heuristics passed around recruiters, contractors and forums, not figures from any official source. Each implies a particular set of assumptions.
- 1.25x to 1.4x is the range often quoted for moving from a W-2 job to a 1099 contract with the same employer, full time. It covers the extra payroll tax and some benefits, but assumes you are paid for nearly every working day.
- 1.5x is the middle-of-the-road version. It assumes modest benefits and very little downtime.
- 2x, sometimes phrased as “divide the salary by 1,000 to get your hourly rate”, assumes a full benefits package and that you will bill only about 70% of your working days. Dividing by 1,000 gives slightly more than 2x, because 2,080 ÷ 1,000 = 2.08.
None of these is wrong in itself. The problem is applying one without knowing which assumptions it carries.
What actually drives the multiplier?
Five inputs decide it, and utilisation (the share of available days you actually bill) moves it more than any of the others.
1. Employer payroll tax
In the US the employer pays 6.2% Social Security on wages up to $184,500 and 1.45% Medicare on all wages for 2026, according to IRS Topic 751 (as of October 2026). In the UK it is 15% employer National Insurance above £5,000 a year. A contractor pays the equivalent themselves, so it belongs in the rate.
2. Benefits
Health insurance is the big one in the US. The KFF 2025 Employer Health Benefits Survey puts the average single-coverage premium at $9,325 a year, with workers paying $1,440 of it, so employers pay about $7,885. For family coverage the figures are $26,993 and $6,850, leaving about $20,143 for the employer. Add any retirement match, bonus, equity, equipment and training budget.
3. Paid days off you give up
Private-industry workers average 11 vacation days and 7 sick days after a year of service, according to BLS data for March 2026, plus an average of 8 paid holidays. That is 26 days, or 10% of the 260 weekdays in a year, that a contractor still takes but is not paid for.
4. Utilisation
Few contractors bill every remaining day. Time goes on sales calls, proposals, invoicing, bookkeeping and gaps between contracts. Billing 80% of available days means 187 billed days out of 234. The billable hours calculator helps you measure your real figure.
5. Your own business costs
Liability insurance, an accountant, software, a laptop, a website and co-working space are costs an employee never sees. They are usually a few thousand a year, which matters more on a small salary.
How much does utilisation change the multiplier?
Dropping from 100% to 70% utilisation moves the break-even multiplier from about 1.4x to 2x. These figures use the US preset in the salary to contract rate calculator: employer FICA and FUTA, $7,885 health cost, a 4% 401(k) match, $2,500 of equipment and training, $4,000 of contractor costs and 26 paid days off.
| Utilisation | $60,000 | $100,000 | $150,000 |
|---|---|---|---|
| 100% | 1.51x | 1.40x | 1.35x |
| 90% | 1.68x | 1.56x | 1.50x |
| 80% | 1.88x | 1.75x | 1.68x |
| 70% | 2.15x | 2.00x | 1.92x |
| 60% | 2.51x | 2.33x | 2.25x |
Two patterns stand out. First, every 10 points of utilisation is worth roughly 0.15x to 0.35x of multiplier, and the effect grows as utilisation falls. Second, the multiplier shrinks as salary rises, because health insurance and equipment are flat costs and US Social Security tax stops at the wage base.
How does the benefits package change it?
A generous package can add half a point to the multiplier, while a bare one takes it below 1.5x even at 80% utilisation.
| Package on a $100,000 salary | 70% | 80% | 100% |
|---|---|---|---|
| Payroll tax only, no benefits or costs | 1.71x | 1.50x | 1.20x |
| Typical: single health cover, 4% match | 2.00x | 1.75x | 1.40x |
| Rich: family cover, 6% match, $10,000 bonus | 2.39x | 2.09x | 1.67x |
All rows keep the 26 paid days off. The “payroll tax only” row shows that even without any benefits, unpaid leave and unbilled days alone push a contractor well above 1x.
Worked example: is a 1.5x offer enough?
Take someone earning $100,000 with the typical package who is offered 1.5x as a freelancer: $48.08 × 1.5 = $72.12 an hour.
- Cost of the job they are leaving: $122,077 (salary, $7,692 employer FICA and FUTA, $7,885 health, $4,000 401(k), $2,500 equipment and training).
- Plus $4,000 of their own business costs: $126,077 needed.
- At 80% utilisation they bill 1,497.6 hours: $72.12 × 1,497.6 = $108,007 of revenue.
- Shortfall: $126,077 − $108,007 = $18,070 a year.
Run backwards, $72.12 an hour at 80% utilisation replaces a salary of about $83,800, not $100,000. If the same person billed every available day, $72.12 would replace about $108,000, so 1.5x is enough only for a full-time contract with no gaps. Break-even at 80% is $84.19, or 1.75x.
Which multiplier fits your situation?
Pick the row that matches how you will actually work, then confirm it with your own numbers.
| Situation | Typical utilisation | Break-even range |
|---|---|---|
| Full-time contract with one client, renewed back to back | 95–100% | 1.35x–1.6x |
| Established freelancer with repeat clients | 75–85% | 1.6x–2.0x |
| New freelancer still building a pipeline | 60–70% | 1.9x–2.5x |
These ranges come from the US defaults across $60,000 to $150,000 salaries. They are break-even figures; a rate that also builds savings for quiet months or rewards scarce skills sits above them. To set a rate from an income goal instead of a salary, use the freelance rate calculator and read the freelance rate formula. For market context, see average freelance rates.
Does the multiplier work the same outside the US?
Roughly, yes: the calculator's country defaults all land between 1.6x and 1.75x at 80% utilisation, but for different reasons.
- UK (£60,000): 1.74x. Employer NI at 15% does most of the work, plus 28 days of statutory leave. See UK day rate to salary for day-rate figures.
- Canada (C$90,000): 1.61x. Employer CPP, CPP2 and EI are capped, so they add only about C$6,200, but federal rules give 30 paid days off.
- Australia (A$110,000): 1.74x. The 12% super guarantee replaces most of the payroll-tax effect.
Health insurance is set to zero in these presets, yet the non-US multipliers are not much lower than the US one: higher statutory leave and pension contributions fill the gap.
How do you work out your own multiplier?
Gather five numbers from your payslip, benefits statement and calendar, and the calculation takes a few minutes.
- Salary and bonus. Use your base salary plus any bonus you reliably receive. Equity counts if it vests on a predictable schedule.
- Employer contributions. Your benefits portal or annual total-reward statement usually shows the employer's share of health premiums and the retirement match. If it does not, ask HR; it is a routine question.
- Paid days off. Count vacation, public holidays and the sick days you actually took last year, not your theoretical allowance.
- Expected utilisation. If you have a signed full-time contract, use 95% to 100%. If you will be selling to several clients, 70% to 80% is a safer starting point until you have a year of data.
- Business costs. Get quotes for professional liability insurance and an accountant, and list the software you would have to pay for yourself.
Enter them in the calculator, which shows your break-even rate, your multiplier and how the 1.25x, 1.5x and 2x rules compare. Treat the result as the minimum you would accept for an equivalent workload, then decide how much margin to add for risk, savings and the value of your skills.
Two people on the same salary can end up with very different multipliers. A developer with family health cover, a 6% match and a $10,000 bonus who expects to bill 70% of days needs about 2.4x, while a colleague on the typical package who is moving to a guaranteed 12-month contract may be fine at 1.4x. That is why a single rule of thumb is a poor substitute for the calculation.
What mistakes do people make with salary multipliers?
- Counting paid leave twice. Adding the cash value of vacation to the package and also dividing by fewer hours overstates the rate.
- Ignoring utilisation. Assuming 2,080 or even 1,872 billable hours is the most common reason new contractors undercharge.
- Forgetting income tax applies to both. The comparison is gross to gross. Do not add your income tax to the contract rate as if the employee did not pay it too. The W-2 vs 1099 guide covers the one tax difference that does belong in the rate.
- Treating the multiplier as the price. It is a floor. Clients compare you with other contractors, not with your old salary.
If you are weighing up the move itself rather than the rate, read job vs freelancing, and check the pricing glossary for terms like utilisation and day rate.
Frequently asked questions
What is the multiplier from salary to contract rate?
It is the contract hourly rate divided by the salary's hourly equivalent (salary ÷ 2,080). Break-even multipliers usually fall between about 1.4x for a full-time single-client contract and 2x or more when you can only bill 70% of your working days.
Is 1.5 times salary enough for a contractor?
Only if you bill close to every working day. With typical US benefits on a $100,000 salary, 1.5x falls short of break-even even at 90% utilisation, and only clears it once you bill nearly every available day.
Where does the 2x rule come from?
It approximates the cost of benefits, employer payroll tax and unpaid time for a contractor who bills around 70% of working days. It is also why some people use salary ÷ 1,000 as a quick hourly rate, since 2,080 hours × 2 is close to 1,000 × 4.
Why does the multiplier fall as salary rises?
Health insurance and equipment cost roughly the same at any salary, so they are a bigger share of a small salary. In the US, Social Security tax also stops at the wage base, $184,500 for 2026.
Should I use the multiplier or calculate my rate from costs?
Calculate it from costs and use the multiplier as a sense check. The multiplier hides the two inputs that matter most, your benefits package and your utilisation.