How to Calculate Billable Hours (and Your Utilization Rate)

The formulas for weekly and annual billable hours, utilization rate and billable revenue, with worked numbers.

Published Oct 27, 2026•By Mubarak, Software Developer & Marketing Specialist

Billable hours drive almost every pricing decision a freelancer makes, yet most people guess them. This guide shows how to calculate them from a time log, how to estimate a year’s worth, how to turn them into a utilization rate, and how they set the rate you need to charge.

Open the Billable Hours Tracker tool

The short answer

To calculate billable hours, add up the time from your log that a client has agreed to pay for. For a yearly figure, multiply average billable hours per week by the weeks you actually work: 25 hours × 46 weeks = 1,150 billable hours. Your utilization rate is billable hours ÷ total hours worked × 100, so billing 26 of 41 hours is 63%. Annual billable revenue is annual billable hours × your hourly rate.

What counts as a billable hour?

A billable hour is an hour of work that a client has agreed, in a contract, quote or statement of work, to pay for.

The test is the agreement, not how productive the work felt. Designing a client’s homepage is billable. Writing the proposal that won the project usually is not. Sending the invoice is not. A status call is billable if your agreement covers meetings and not if it does not. Our list of billable vs non-billable tasks goes through the common cases one by one, and the pricing glossary has short definitions of the terms used here.

Everything else you do to keep the business running, such as sales, marketing, bookkeeping, learning and chasing payments, is non-billable. You still need to track it, because the ratio between the two is what tells you whether your rate works.

How do you calculate billable hours from a time log?

Filter your time entries to one client (for an invoice) or one period (for planning) and sum the durations marked billable.

  1. Log every block of work with a client and a description. A timer or same-day manual entries are both fine; see how to track time as a freelancer.
  2. Mark each entry billable or non-billable using your contract as the reference.
  3. Convert to decimal hours. 1 hour 45 minutes is 1.75 hours, not 1.45. Divide the minutes by 60.
  4. Apply your rounding rule if you have one, for example tenths of an hour. Our guide to 6-minute and 15-minute billing increments has a conversion chart.
  5. Add up the billable entries. That total is what goes on the invoice, multiplied by the rate for each client.

Here is one real-looking week for a freelance web developer:

Example week: hours worked vs billable hours
DayHours workedBillable hoursUtilization
Monday8.505.5065%
Tuesday9.006.2569%
Wednesday8.004.7559%
Thursday8.506.0071%
Friday7.003.5050%
Week41.0026.0063.4%

The developer worked 41 hours and billed 26. The other 15 hours went on email, a sales call, a proposal and bookkeeping. Friday’s low figure is typical: many freelancers batch admin at the end of the week.

How do you calculate billable hours per year?

Multiply your average billable hours per week by the number of weeks you actually work in a year.

Weeks worked = 52 − vacation weeks − public holiday weeks − sick weeks
Annual billable hours = average billable hours per week × weeks worked

A freelancer who takes 3 weeks of vacation, about 2 weeks of public holidays (10 days) and allows 1 week for illness works 46 weeks. Nobody pays you for those 6 weeks, so leaving them out of the calculation is the single most common way freelancers overestimate their income.

Annual billable hours by weekly billable hours and weeks worked
Billable h/weekWeeks workedAnnual billable hoursRevenue at $75/h
2046920$69,000
25461,150$86,250
30461,380$103,500
25481,200$90,000
30481,440$108,000
35481,680$126,000

Use an average from several weeks of tracking, not your best week. If you have no history, track for two to four weeks first; a single week can be skewed by one large deadline or one quiet patch.

How do you calculate your utilization rate?

Divide billable hours by total hours and multiply by 100. The only decision is what “total hours” means.

Utilization rate = billable hours ÷ total hours × 100

There are two common denominators:

  • Hours actually worked. Shows what share of your real effort is paid. Best for solo freelancers whose working week varies.
  • Fixed capacity, such as 40 hours. Shows how full your week is against a standard. Common in agencies and consultancies, and useful for spotting overwork, because utilization above 100% becomes possible.
Same weeks, two denominators
WeekWorkedBillablevs hours workedvs 40-hour capacity
Normal week412663%65%
Short week322269%55%
Crunch week554480%110%

The crunch week shows why the choice matters: against hours worked it looks merely busy, against capacity it is clearly unsustainable. Pick one and stick to it so your weekly figures are comparable. Our guide to a good utilization rate explains what to aim for.

How do billable hours turn into revenue and a rate?

Revenue is billable hours × rate, and the rate you need is your revenue target ÷ billable hours.

Annual billable revenue = annual billable hours × hourly rate
Required hourly rate = annual revenue target ÷ annual billable hours

Worked example

The developer above bills an average of 26 hours a week for 46 weeks: 26 × 46 = 1,196 billable hours a year. At $95 an hour that is $113,620 of billable revenue. If the target is $120,000, the required rate is $120,000 ÷ 1,196 = $100.33, so roughly $101 an hour. Alternatively, at $95 the developer would need $120,000 ÷ ($95 × 46) = 27.5 billable hours a week.

That revenue target should already include tax, expenses and some profit. The freelance rate calculator builds the full number for you, and the freelance rate formula page shows how each part fits together. To compare against what others charge, see average freelance rates.

How do you calculate billable hours for an invoice with several rates?

Total the billable hours for each rate separately, multiply each subtotal by its rate, then add the amounts.

Many freelancers charge one client different rates for different work: a higher rate for strategy or senior development, a lower one for production or travel. Never average the rates; the invoice total depends on how many hours sit at each one. Here is one client’s month for the same developer:

One client, three rates, one month
Work typeLogged (h:mm)Decimal hoursRateAmount
Development31:4531.75$95$3,016.25
Technical planning6:206.33$120$760.00
Travel (half rate)3:003.00$47.50$142.50
Total41:0541.08—$3,918.75

Two details matter. First, convert h:mm to decimal before multiplying: 6:20 is 6 + 20 ÷ 60 = 6.33 hours, and the planning amount is calculated from the exact 380 minutes (380 ÷ 60 × $120 = $760.00), not the rounded decimal. Second, if your contract specifies a rounding increment, apply it before this step. The tracker in the billable hours calculator stores a rate on each entry, applies rounding and exports a CSV with the decimal hours and amount per line, so the invoice can be built straight from it.

If you compare your billable revenue with a salaried job, remember that an employee’s salary is paid across all working hours, including meetings and admin. The salary to contract rate calculator makes that comparison on an equal footing.

What mistakes make billable hour estimates wrong?

Most errors come from counting time that never reaches an invoice.

  • Using 52 weeks. Vacation, holidays and illness are unpaid. 46 to 48 working weeks is more realistic for most people.
  • Assuming 40 billable hours a week. Even busy freelancers spend a large share of their week on unbilled work.
  • Writing h:mm as a decimal. 2:30 is 2.5 hours. Entering 2.30 undercharges by 12 minutes.
  • Not tracking short tasks. Five-minute emails and calls add up to hours a week. Log them, then decide whether to bill them.
  • Confusing billed with paid. Discounts, write-offs and unpaid invoices mean collected revenue is lower than billable hours × rate. If clients pay late, see the late payment interest calculator.

How can you increase billable hours without working longer?

Move unpaid client work onto the invoice and cut admin you do not need to do.

  • Put meetings, revision rounds and project management into your contract as billable, or price them into a fixed fee.
  • Batch admin, such as invoicing and bookkeeping, into one fixed slot per week instead of letting it fragment your days.
  • Use templates for proposals and a quote generator so sales takes less time.
  • Move steady clients to a retainer so less time goes on finding work each month.

Once you know your numbers, put them into the billable hours calculator to see your utilization, effective hourly rate and the hours or rate you need for your target. The effective hourly rate guide takes the same numbers one step further.

Frequently asked questions

How do you calculate billable hours?

Add up the time you spent on work a client has agreed to pay for, from your time log, for the period you are invoicing. To estimate capacity, multiply billable hours per week by the number of weeks you actually work in a year.

What is the formula for utilization rate?

Utilization rate = billable hours ÷ total hours worked × 100. If you worked 40 hours and billed 26, your utilization is 65%.

How many billable hours are in a year for a freelancer?

It depends on weeks worked and billable hours per week. A freelancer billing 25 hours a week for 46 weeks has 1,150 billable hours; one billing 30 hours for 48 weeks has 1,440.

Should utilization be based on hours worked or a 40-hour week?

Either works if you stay consistent. Hours worked shows how much of your real effort is paid; a fixed 40-hour capacity is better for comparing weeks and spotting when you are overworking.

Do billable hours include travel time?

Only if your contract says so. Many freelancers bill travel at a reduced rate or not at all, so agree it in writing before the work starts.