Billing in 6-Minute and 15-Minute Increments
How tenth-hour and quarter-hour billing work, a minutes-to-decimal conversion chart, and how to round fairly.
Many hourly professionals do not bill exact minutes. They bill in fixed increments, most often a tenth of an hour (6 minutes) or a quarter of an hour (15 minutes). This guide explains how each system works, gives you conversion charts, and shows with real numbers how much the choice of increment and rounding method changes an invoice.
Open the Billable Hours Tracker toolThe short answer
Billing in 6-minute increments means recording time in tenths of an hour: 1 to 6 minutes is 0.1 hour, 7 to 12 minutes is 0.2, and 60 minutes is 1.0. Billing in 15-minute increments uses quarter hours: up to 15 minutes is 0.25, up to 30 is 0.5 and up to 45 is 0.75. To convert, divide minutes by the increment, round up to a whole number, and multiply by 0.1 or 0.25. Use only the increment your contract or client allows.
What does billing in 6-minute increments mean?
It means every time entry is expressed in tenths of an hour, and each tenth is 6 minutes.
An hour has 60 minutes, so a tenth of an hour is 6 minutes. Tenth-hour billing is a long-standing convention in law firms and some accounting and consulting practices, because it produces tidy decimal figures (0.1, 0.2, 0.3) that multiply easily by an hourly rate. Most systems round each entry up to the next tenth, so a 2-minute call is billed as 0.1 hour.
| Minutes worked | Billed hours |
|---|---|
| 1–6 | 0.1 |
| 7–12 | 0.2 |
| 13–18 | 0.3 |
| 19–24 | 0.4 |
| 25–30 | 0.5 |
| 31–36 | 0.6 |
| 37–42 | 0.7 |
| 43–48 | 0.8 |
| 49–54 | 0.9 |
| 55–60 | 1.0 |
How does 15-minute billing work?
Time is billed in quarter hours, so each unit is 0.25 hours and a short task is billed as at least 15 minutes.
| Minutes worked | Billed hours |
|---|---|
| 1–15 | 0.25 |
| 16–30 | 0.50 |
| 31–45 | 0.75 |
| 46–60 | 1.00 |
Quarter-hour billing is simpler to record by hand and common among freelancers, coaches and tradespeople. Its downside is coarseness: a 1-minute email and a 15-minute call cost the client the same.
How do you convert minutes to decimal hours?
Divide the minutes by 60 for exact decimal hours, or divide by the increment and round up for billed units.
Tenths billed = round up (minutes ÷ 6) × 0.1
Quarters billed = round up (minutes ÷ 15) × 0.25
Example: 40 minutes is 40 ÷ 60 = 0.67 decimal hours. In tenths, 40 ÷ 6 = 6.67, rounded up to 7, so 0.7 hours. In quarters, 40 ÷ 15 = 2.67, rounded up to 3, so 0.75 hours.
| Minutes | Exact decimal | Tenths (6-min, up) | Quarters (15-min, up) |
|---|---|---|---|
| 5 | 0.08 | 0.1 | 0.25 |
| 10 | 0.17 | 0.2 | 0.25 |
| 15 | 0.25 | 0.3 | 0.25 |
| 20 | 0.33 | 0.4 | 0.50 |
| 25 | 0.42 | 0.5 | 0.50 |
| 30 | 0.50 | 0.5 | 0.50 |
| 35 | 0.58 | 0.6 | 0.75 |
| 40 | 0.67 | 0.7 | 0.75 |
| 45 | 0.75 | 0.8 | 0.75 |
| 50 | 0.83 | 0.9 | 1.00 |
| 55 | 0.92 | 1.0 | 1.00 |
| 60 | 1.00 | 1.0 | 1.00 |
For any other value, the converter under the billable hours calculator accepts h:mm, decimal or “1h 20m” and shows all three figures at once.
How much does the increment change an invoice?
It can change a day’s bill by 30% or more when you log many short tasks.
Worked example: a consultant charging $150 an hour logs six tasks in one day for one client, lasting 4, 11, 23, 38, 52, 9 minutes (137 minutes in total).
| Method | Billed minutes | Billed hours | Amount |
|---|---|---|---|
| Exact time | 137 | 2.28 | $342.50 |
| Total for the day, rounded up to 0.1 h | 138 | 2.30 | $345.00 |
| Each entry rounded up to 0.1 h (6 min) | 150 | 2.50 | $375.00 |
| Each entry rounded up to 0.25 h (15 min) | 180 | 3.00 | $450.00 |
Rounding each entry up to a quarter hour bills 43 more minutes than were worked, an extra $107.50 for one day. Rounding the day’s total to a tenth adds only 1 minute. The more entries you split a day into, the bigger the gap, which is why some clients ask you to combine small tasks or round only the total.
What conversion mistakes cause wrong invoices?
Most errors come from reading clock time as a decimal, or a decimal as clock time.
| Logged | Wrongly billed as | Correct | Error |
|---|---|---|---|
| 1:30 (h:mm) | 1.30 h | 1.50 h | −$20.00 |
| 0:45 | 0.45 h | 0.75 h | −$30.00 |
| 2:15 | 2.15 h | 2.25 h | −$10.00 |
| 1.2 h (decimal) | 1 h 20 min | 1 h 12 min | +$13.33 |
Undercharging is the more common direction, because most time trackers display h:mm and most invoices expect decimals. Two habits prevent it: convert with a tool rather than by eye, and keep the h:mm and decimal columns side by side on the timesheet so a mismatch is obvious. A quick sanity check is that any value with minutes of 30 should end in .5 as a decimal, and 45 should end in .75.
What about 10-minute increments?
Some freelancers use 10-minute units (one-sixth of an hour). They are easy to read on a clock, but the decimal values repeat (10 minutes = 0.1667 hours), so invoices need rounding to two decimals. If you use them, calculate the amount from minutes, for example 50 minutes × $120 ÷ 60 = $100.00, rather than from a rounded decimal such as 0.83 hours, which gives $99.60.
Should you round up, or to the nearest increment?
Rounding up is the common convention; rounding to the nearest increment is fairer for long entries but still needs a minimum for short ones.
- Round up: 7 minutes becomes 0.2 hours (12 minutes). Simple, predictable, always in your favor.
- Round to nearest: 7 minutes becomes 0.1 hours, 10 minutes becomes 0.2. Fairer over many entries, but a 2-minute task would round to zero, so set a minimum of one increment.
- Round the total, not each entry: sum the day’s or task’s exact time, then round once. This adds the least.
The tracker in our billable hours tool lets you choose the increment (6, 10, 15 or 30 minutes) and the direction, and shows exactly how many minutes rounding added to the selected period.
How do increments differ from minimum charges?
An increment is the unit time is counted in; a minimum charge is the smallest amount billed for a type of task.
They are often combined. A consultant might bill in 6-minute increments but set a 0.5-hour minimum for any phone call, because a call interrupts focused work far beyond its own length. Another might charge a 1-hour minimum for urgent same-day requests. Minimums are legitimate when they are agreed in advance and applied consistently.
| Task | Actual | 6-min increment only | With 0.5 h call minimum |
|---|---|---|---|
| Phone call | 9 min | 0.2 h = $24.00 | 0.5 h = $60.00 |
| Phone call | 41 min | 0.7 h = $84.00 | 0.7 h = $84.00 |
| Document review | 9 min | 0.2 h = $24.00 | 0.2 h = $24.00 |
The minimum only changes short calls; longer ones are billed on actual time. Write both the increment and any minimums into the same billing clause so the client sees the whole rule at once.
Which increment should a freelancer use?
Use whatever your contract states; if you are setting the terms, 6 minutes is the most precise convention clients recognize.
When 6-minute increments fit
Work with many short tasks: legal and compliance work, bookkeeping, support retainers, development with frequent small fixes. Clients see precise entries, and over-billing from rounding stays small.
When 15-minute increments fit
Work done in longer blocks, such as design sessions, writing or coaching calls, where entries are rarely shorter than 15 minutes anyway. Simpler to keep and to read.
When to avoid increments altogether
If you are moving towards fixed-fee or retainer pricing, bill the agreed price and track exact minutes privately to check your effective hourly rate.
How do you use billing increments fairly?
Put the increment in writing, record exact time, and round only at billing.
- State the increment and rounding method in your contract or quote.
- Keep the raw log exact so you can show actual time if asked.
- Do not split one continuous task into several entries to collect extra minimums.
- Follow client billing guidelines where they exist; many corporate and legal clients specify the increment and whether rounding applies per entry or per day.
- Lawyers and other regulated professionals should also check the professional conduct rules that apply in their jurisdiction, which generally require fees to be reasonable and clearly communicated.
For the bigger picture, see how to track time as a freelancer and how to calculate billable hours. Once you know your billed hours, the freelance rate calculator and the rate formula show whether your rate covers your costs. Terms are defined in the pricing glossary.
Frequently asked questions
What is 6-minute billing?
Billing time in tenths of an hour, where each 0.1 hour equals 6 minutes. A task that takes 1 to 6 minutes is billed as 0.1 hour, 7 to 12 minutes as 0.2, and so on.
How do you convert minutes to tenths of an hour?
Divide minutes by 6 and round up to the next whole number, then put a decimal point before the last digit. 20 minutes ÷ 6 = 3.33, which rounds up to 4, or 0.4 hours.
What is 15 minutes as a decimal of an hour?
15 minutes is 0.25 hours, 30 minutes is 0.5 and 45 minutes is 0.75.
Is 15-minute billing fair to clients?
It can add up to 14 minutes to every entry, so it is fair only when entries are long or the client has agreed to it. For many short tasks, 6-minute increments or batching small tasks into one entry is fairer.
Should I round each entry or the daily total?
Rounding the daily or task total adds less than rounding each entry. Follow whatever your contract or the client's billing guidelines specify.