How to Price Fiverr Gigs to Cover the 20% Fee

A repeatable method for Basic, Standard and Premium packages that keeps your real rate intact.

Published Oct 27, 2026•By Mubarak, Software Developer & Marketing Specialist

Most Fiverr pricing advice says to look at competitors and go a little lower. That ignores the one cost every seller pays: Fiverr keeps a fifth of every order. This guide works from the rate you need, adds the fee correctly, and turns it into three package prices.

Open the Platform Fee Calculator tool

The short answer

To price a Fiverr gig, estimate the hours it takes, multiply by the hourly rate you want to take home, then divide by 0.8, because as of October 2026 Fiverr keeps 20% of every order. A package that takes 3 hours at a $40 target rate is $120 of your time, so list it at $150. Do not add 20% instead: $120 plus 20% is $144, and after the fee you receive only $115.20.

Why does Fiverr's fee change how you should price?

Because Fiverr takes 20% off the top, a price that looks fine on the listing is only 80% of what you will receive.

Fiverr's earnings help article confirms sellers earn 80% of each order, including extras and tips. If your gig is $100 and it takes you two hours, your real rate is $40 an hour, not $50. Sellers who forget this often feel busy but underpaid, because every price on their profile is 25% higher than their actual earnings would justify. The full fee picture is in Fiverr seller fees.

What is the formula for pricing a Fiverr gig?

Divide what you want to receive by 0.8; that is the listing price that leaves you the right amount after the fee.

Gig price = (Hours × Target hourly rate) ÷ 0.8

Dividing by 0.8 is the same as adding 25%, not 20%. The fee is charged on the higher price, so a 20% markup leaves you short. Here is the difference at common targets:

Fiverr listing price needed to receive a target amount
You want to receiveCorrect price (÷ 0.8)Price with +20% markupYou would actually get
$40$50$48$38.40
$80$100$96$76.80
$160$200$192$153.60
$400$500$480$384
$800$1,000$960$768

If you are paid out in a currency other than US dollars, also allow for conversion. With a 2% conversion markup, divide by 0.8 × 0.98 = 0.784 instead. The Fiverr fee calculator does this in reverse mode: enter what you want to keep and it returns the price, including your withdrawal method and conversion spread.

How do you work out your target hourly rate?

Start from the income you need, not from what other sellers charge.

Your target rate should cover your living costs, tax, software, unpaid time spent on messages and revisions, and weeks without orders. The freelance rate calculator works this out from your income goal and expenses, and the freelance rate formula explains each step. Compare the result with average freelance rates for your field to sanity-check it. Remember to count the time you spend on Fiverr that buyers don't pay for directly: answering inquiries, writing custom offers and handling revisions.

How should you price Basic, Standard and Premium packages?

Define what each tier delivers, estimate the hours for each, and apply the same formula to all three.

Worked example: a logo design gig

A designer wants to take home $40 an hour before tax. She estimates her hours per package, including the revisions each tier allows:

PackageIncludesHoursNeeds to receiveList priceBuyer pays
Basic1 concept, 2 revisions, PNG3$120$150$161.75
Standard3 concepts, 3 revisions, vector files6$240$300$316.50
Premium3 concepts, unlimited revisions within 14 days, brand sheet10$400$500$527.50

The buyer column adds Fiverr's 5.5% service fee, plus $3.50 for the Basic package because it is under $200 (Fiverr buyer fees, October 2026). The buyer fee does not affect what she receives, but it is what the buyer compares.

Rules that keep packages profitable

  • Each tier adds deliverables, not just revisions. Unlimited revisions are where hours leak; cap them by count or by time window.
  • Price the hours you actually spend. Time your next few orders, including messaging, and adjust the hour estimates.
  • Keep the gap between tiers meaningful. If Standard is only slightly more than Basic, most buyers take Standard and your Basic tier stops being an entry point.

How should you price gig extras and custom offers?

Exactly like gigs: Fiverr keeps 20% of extras, so divide your target by 0.8.

An extra like 24-hour delivery that you want $40 for should be listed at $50. Source files you want $20 for should be $25. Custom offers follow the same rule: estimate the hours, multiply by your rate, divide by 0.8. Tips are also subject to the 20% fee, so do not count on them to make up for underpricing.

Does the buyer's small order fee matter for your pricing?

Yes, at the low end: orders under $200 carry an extra $3.50 for the buyer, which makes very cheap gigs proportionally expensive.

A $15 gig costs the buyer $15 + $0.83 + $3.50 = $19.33, almost 29% more than the listing. A $150 gig costs $161.75, 7.8% more. Just below the $200 line the fee flips in an interesting way: a $195 package costs the buyer $209.23, and a $200 package costs $211.00. The buyer pays $1.77 more for the $200 option and you receive $4 more. If a package sits just under $200, consider whether $200 is a better price for both sides.

How do you price per-word, per-minute or per-page Fiverr gigs?

Convert your target hourly rate into a rate per unit using your real output speed, then divide by 0.8.

Price per unit = (Target hourly rate ÷ Units you produce per hour) ÷ 0.8

Writers, translators, editors and video editors usually sell by volume rather than by package. The method is the same as for packages; you just need an honest figure for output per hour, including research, revisions and file handling, not only the time spent typing or cutting.

ServiceTarget rateReal output per hourYou need per unitList per unit
Blog writing$40/hr500 words$0.08/word$0.10/word ($100 per 1,000 words)
Video editing$40/hr2 finished minutes$20/minute$25/minute
Proofreading$30/hr3,000 words$10 per 1,000 words$12.50 per 1,000 words

The output-per-hour figures above are illustrations, not benchmarks; time your own work over several orders. Then turn the per-unit price into packages at fixed volumes (for example 500, 1,000 and 2,000 words) so buyers can order in one click, and offer extra volume as a gig extra priced with the same per-unit rate.

Should you start with low prices as a new Fiverr seller?

Starting slightly lower can help win first reviews, but set a floor that still covers your costs after the fee.

  1. Calculate your target price with the formula above.
  2. Set a launch price no lower than your break-even: the hours times the minimum hourly amount you can live on, divided by 0.8.
  3. Decide in advance when you will raise it, for example after a set number of reviews.
  4. Raise prices in steps and watch whether order volume holds.

Good signals that it is time to raise prices: your delivery queue is regularly full, you are turning down orders, or most buyers choose your top package. Raise one package at a time, by a step you can explain (for example, the price that matches your current hourly target ÷ 0.8), and give it a few weeks before judging the effect on orders. If your order count holds while your price rises, your effective hourly rate has gone up without any extra work. If orders drop sharply, you have learned where your market's ceiling is for that package today, and you can add deliverables to justify the higher tier instead of going back.

Cheap gigs also bring more messages per dollar, so your effective rate on them is usually lower than the hours estimate suggests. Fiverr is not your only option either; compare its 20% with other marketplaces in Upwork vs Fiverr vs Freelancer.com fees, and when you are ready to withdraw, read the cheapest way to withdraw from Fiverr. Pricing terms such as value-based pricing are defined in the freelance pricing glossary.

Frequently asked questions

How do I include Fiverr's fee in my price?

Divide the amount you want to receive by 0.8. If you want $200 from an order, list it at $250, because Fiverr keeps 20%.

Should I mark up my price by 20% to cover Fiverr's fee?

No. Adding 20% is not enough because Fiverr takes 20% of the higher price. Adding 25% (dividing by 0.8) is the correct markup.

How should I price my three Fiverr packages?

Price each package from the hours it takes at your target hourly rate, divide by 0.8 for the fee, and make each tier add clear deliverables rather than only more revisions.

Does the buyer's service fee affect my pricing?

It does not change your earnings, but buyers see it at checkout. Orders under $200 carry an extra $3.50 small order fee, which makes very small gigs look relatively expensive.

Should new Fiverr sellers charge less?

Many start slightly lower to win first reviews, but set a floor that still covers your costs after the 20% fee and raise prices as reviews build.